5 (FIVE) "S"
5S is a method for organizing a workplace, especially a shared workplace (like a shop floor or an office space), and keeping it organized. It's sometimes referred to as a housekeeping methodology, however this characterization can be misleading because organizing a workplace goes beyond housekeeping (see discussion of "Seiton" below).
The key targets of 5S are workplace morale and efficiency. The assertion of 5S is, by assigning everything a location, time is not wasted by looking for things. Additionally, it is quickly obvious when something is missing from its designated location. Advocates of 5S believe the benefits of this methodology come from deciding what should be kept, where it should be kept, and how it should be stored. This decision making process usually comes from a dialog about standardization which builds a clear understanding, between employees, of how work should be done. It also instills ownership of the process in each employee.
In addition to the above, another key distinction between 5S and "standardized cleanup" is Seiton. Seiton is often misunderstood, perhaps due to efforts to translate into an English word beginning with "S" (such as "sort" or "straighten"). The key concept here is to order items or activities in a manner to promote work flow. For example, tools should be kept at the point of use, workers should not have to repetitively bend to access materials, flow paths can be altered to improve efficiency, etc.
The 5S's are:
Phase 1 - Seiri (整理) Sorting: Going through all the tools, materials, etc., in the plant and work area and keeping only essential items. Everything else is stored or discarded.
Phase 2 - Seiton (整頓) Straighten or Set in Order: Focuses on efficiency. When we translate this to "Straighten or Set in Order", it sounds like more sorting or sweeping, but the intent is to arrange the tools, equipment and parts in a manner that promotes work flow. For example, tools and equipment should be kept where they will be used (i.e. straighten the flow path), and the process should be set in an order that maximizes efficiency.
Phase 3 - Seiso (清掃) Sweeping: Systematic Cleaning or the need to keep the workplace clean as well as neat. At the end of each shift, the work area is cleaned up and everything is restored to its place. This makes it easy to know what goes where and have confidence that everything is where it should be. The key point is that maintaining cleanliness should be part of the daily work - not an occasional activity initiated when things get too messy.
Phase 4 - Seiketsu (清潔) Standardizing: Standardized work practices or operating in a consistent and standardized fashion. Everyone knows exactly what his or her responsibilities are to keep above 3S's.
Phase 5 - Shitsuke (躾) Sustaining: Refers to maintaining and reviewing standards. Once the previous 4S's have been established they become the new way to operate. Maintain the focus on this new way of operating, and do not allow a gradual decline back to the old ways of operating. However, when an issue arises such as a suggested improvement, a new way of working, a new tool, or a new output requirement then a review of the first 4S's is appropriate.
A sixth phase "Safety" is sometimes added. Purists, however, argue that adding it is unnecessary since following 5S correctly will result in a safe work environment.
- COST REDUCTION
- HIGH LEVEL OF COSTUMER SATISFACTION
- ON TIME DELIVERY
- INCREASE PRODUCTION
- TOP MANAGEMENT COMMITMENT
- MIDDLE MANAGEMENT COMMITMENT
- EXISTENCE OF 5’s PLAN
- EXISTENCE OF 5’s ORGANIZATION
- CONTINUOUS OF EDUCATION AND PROMOTION
- RECOGNITION AND REWARDS
- WORKERS PARTICIPATION